Polishing set "finish" Inox | 2 parts for drill | 125 mm

125 mm | 8 mm shank

Contents: polishing disc | compound

high-gloss

Weight: kg
€45.71 -5% You save €2.29
€43.42
Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost

Discount compared to single retail prices

Availability
2-3 Days *
  • Buy 1 for €21.95 each and save 5%
  • Buy 1 for €21.48 each and save 5%
Item No.
500-bm-inox-125-1

INOX polishing set for drills | 125mm

Polishing set for high-gloss polishing of hard-to-reach components of stainless steel with a drill. The polishing set quickly delivers a clear high gloss on carefully pre-polished INOX surfaces.

Product features

  • Shank buffing disc N16, 125 x 8 mm
  • Vmax = 30 m/s, Umax = 4,600 rpm
  • Stainless steel high-gloss polishing paste Menzerna P126 (approx. 1, 3 kg)

Application

  • Wear protective equipment and follow safety regulations!
  • Roughen the polishing wheel first with the help of a suitable dressing tool
  • Wet the rotating tool with the polishing paste
  • Polish the evenly pre-polished and clean surface quickly in cross-coats at approx. 25-30 m/s (4,000 - 4,600 rpm) to a high gloss
  • Measure the pressure carefully! If the contact pressure is too high and/or the speed is too low, this can lead to an unsteady surface due to overheating of the workpiece
  • After polishing, clean the surface with a soft, lint-free cloth and, if necessary, degrease with a suitable solvent or Viennese lime