Polishing set "finish" Inox | 3 parts for angle grinder | M14 adapter | 250 mm

250 mm | 14 mm bore

Contents: polishing disc | compound | adapter M14

high-gloss

Weight: kg
€73.43 -5% You save €3.67
€69.76
Incl. 19% VAT, excl. Shipping Cost
Availability
2-3 Days *
  • Buy 1 for €20.43 each and save 5%
  • Buy 1 for €26.72 each and save 5%
  • Buy 1 for €22.61 each and save 5%
Item No.
500-ws-inox-a-250-1

INOX polishing set for Angle Grinders | 250 mm

Polishing set for high-gloss polishing of stainless steel surfaces with hand polishing machines or angle grinders with M 14 shank. The polishing set quickly delivers a clear high gloss on carefully pre-polished INOX surfaces.

Product features

  • High-gloss polishing wheel made of fully round layers of raw cotton N2501, 3-fold quilted, D = 250 mm, S = 25 mm, W = 14 mm
  • Vmax = 40 m/s, Umax = 3,100 rpm
  • Stainless steel high-gloss polishing paste Menzerna P126 (approx. 1, 3 kg)
  • M14 mandrel for angle grinders, maximum disc thickness: approx. 50 mm, 1 flat nut M14 left-hand thread / approx. 70 mm diameter, 1 flange 2 x 14 x 70 mm

Application

  • Wear protective equipment and follow safety regulations!
  • Roughen the polishing wheel first with the help of a suitable dressing tool
  • Wet the rotating tool with the polishing paste
  • Polish the evenly pre-polished and clean surface quickly in cross-coats at approx. 25-30 m/s (1,900 - 2,300 rpm) to a high gloss
  • Measure the pressure carefully! If the contact pressure is too high and/or the speed is too low, this can lead to an unsteady surface due to overheating of the workpiece
  • After polishing, clean the surface with a soft, lint-free cloth and, if necessary, degrease with a suitable solvent or Viennese lime