Polishing set "finish" Inox | 2 parts for angle grinder M14 | 200 mm
200 mm | 14 mm bore
Contents: polishing disc | compound
high-gloss
Weight:
kg
Item No.
500-ws-inox-200-1
INOX polishing set for Angle Grinders | 200 mm
Polishing set for high-gloss polishing of stainless steel surfaces with hand polishing machines or angle grinders with M 14 shank. The polishing set quickly delivers a clear high gloss on carefully pre-polished INOX surfaces.
Product features
- High-gloss polishing wheel made of fully round layers of raw cotton N2501, 3-fold quilted, D = 200 mm, S = 25 mm, W = 14 mm
- Vmax = 40 m/s, Umax = 3,800 rpm
- Stainless steel high-gloss polishing paste Menzerna P126 (approx. 1, 3 kg)
Application
- Wear protective equipment and follow safety regulations!
- Roughen the polishing wheel first with the help of a suitable dressing tool
- Wet the rotating tool with the polishing paste
- Polish the evenly pre-polished and clean surface quickly in cross-coats at approx. 25-30 m/s (2,400 - 2,900 rpm) to a high gloss
- Measure the pressure carefully! If the contact pressure is too high and/or the speed is too low, this can lead to an unsteady surface due to overheating of the workpiece
- After polishing, clean the surface with a soft, lint-free cloth and, if necessary, degrease with a suitable solvent or Viennese lime