Polishing set "super-finish" Varnishes & Plastics | 4 parts for polishing stand | 250 mm

250 mm | Bore configurable

Contents: polishing discs | compounds

high-gloss | super-finish

Weight: kg
€144.93 -5% You save €7.25
€137.68
Incl. 19% VAT, excl. Shipping Cost
Availability
2-3 Days *
  • Buy 1 for €42.70 each and save 5%
  • Buy 1 for €46.15 each and save 5%
  • Buy 1 for €18.91 each and save 5%
  • Buy 1 for €29.93 each and save 5%
Item No.
500-pb-poly-250-2

Polishing-kit "super finish" for plastics and varnishes | polishing stand | 250mm

Four-part super finish polishing kit for plastics and varnishes especially for the polishing block or grinding block with mounting flange or conical thread. This polishing set reliably delivers in two consecutive steps a flawless, super brillant gloss and transparency on plastics and varnishes.

Product features

  • High-gloss polishing wheel EFFEKTA FM230, diameter 250 mm with freely configurable bore
  • Super Finish EFFEKTA FM209 polishing disc, diameter 250 mm with freely configurable bore
  • Vmax = 40 m/s, Umax = 3,100 rpm
  • High-gloss polishing compound Menzerna GW16 (approx. 1.3 kg)
  • Super Finish polishing compound Menzerna P175 (approx. 1.35 kg)

Application

  • Wear protective equipment and follow safety regulations!
  • Roughen the polishing discs before use using a suitable dressing tool
  • Wet rotating tool sparingly with polishing paste
  • Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!

Step 1

  • The evenly pre-polished and cleaned surface in cross passes with the EFFEKTA FM230 polishing wheel and Menzerna GW16 on lacquer and thermoset surfaces at approx. 20-25 m/s (1,550 - 1,950 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (780 - 1,150 rpm) quickly polish to a high gloss
  • After polishing, the surface is cleaned with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a tenside solution

Step 2

  • The clean, high-gloss polished surface is achieved with the EFFEKTA FM209 super finish polishing disc and Menzerna P175 on lacquer and thermoset surfaces at approx. 20-25 m/s (1,550 - 1,950 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (780 - 1,150 rpm) quickly in cross passes until the desired mirror finish is achieved
  • The Super Finish Paste P175 only leaves an invisible microfilm on the flawless surface. To protect this surface, one usually avoids mechanical cleaning after superfinishing