Polishing kit "polish + finish" Inox | 4 parts for drill | 125 mm
125 mm | 8 mm shank
Contents: polishing discs | compounds
Polish & high-gloss finish
INOX finish polishing set for drills | 125mm
The four-part finish polishing set for stainless steel enables hard-to-reach INOX components to be polished to a high gloss. This polishing set reliably delivers the flawless mirror finish that is characteristic of stainless steel on carefully pre-polished surfaces.
Product features
- Shank mounted buffing wheel N2550, 125 x 8 mm
- Shank mounted buffing wheel FM230, 125 x 8 mm
- Vmax = 30 m/s, Umax = 4,600 rpm
- Medium cut polishing compound Menzerna P14F (approx. 1.3 kg)
- High-Gloss colouring compound Menzerna P126 (approx. 1.3 kg)
Application
- Wear protective equipment and follow safety regulations!
- Roughen the polishing discs before use using a suitable dressing tool
- Wet rotating tool sparingly with polishing paste
- Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!
Step 1
- Quickly polish the pre-polished and cleaned surface in cross passes with a shank mounted buffing wheel N2550 and Menzerna P14F at approx. 25-30 m/s (4,000 - 4,600 rpm) to a high gloss
- After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime
Step 2
- Polish the clean, shiny surface using the N16 shank tool and Menzerna P126 at approx. 25-30 m/s (4,000 - 4,600 rpm) in cross passes until obtaining a high gloss finish
Protective Equipment when Polishing
When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.
Wear eye / face protection
The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.
Wear respiratory protection
Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.
Wear protective clothing
Flying parts can cause sensitive injuries all over the body.
Wear gloves
In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.
Wear ear protection
Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.