Polishing kit "polish + finish" Inox | 4 parts for drill | 100 mm

100 mm | 6 mm shank

Contents: polishing discs | compounds

Polish & high-gloss finish

Weight: kg
€74.49 -5% You save €3.72
Incl. 19% VAT, excl. Shipping Cost
2-3 Days *
  • Buy 1 for €15.68 each and save 5%
  • Buy 1 for €20.43 each and save 5%
  • Buy 1 for €16.96 each and save 5%
  • Buy 1 for €18.66 each and save 5%
Item No.

INOX finish polishing set for drills | 100mm

The four-part finish polishing set for stainless steel enables hard-to-reach INOX components to be polished to a high gloss. This polishing set reliably delivers the flawless mirror finish that is characteristic of stainless steel on carefully pre-polished surfaces.

Product features

  • Shank mounted buffing wheel N2550, 100 x 6 mm
  • Shank mounted buffing wheel FM230, 100 x 6 mm
  • Vmax = 30 m/s, Umax = 5,700 rpm
  • Medium cut polishing compound Menzerna P14F (approx. 1.3 kg)
  • High-Gloss colouring compound Menzerna P126 (approx. 1.3 kg)


  • Wear protective equipment and follow safety regulations!
  • Roughen the polishing discs before use using a suitable dressing tool
  • Wet rotating tool sparingly with polishing paste
  • Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!

Step 1

  • Quickly polish the pre-polished and cleaned surface in cross passes with a shank mounted buffing wheel N2550 and Menzerna P14F at approx. 25-30 m/s (5,000 - 5,700 rpm) to a high gloss
  • After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime

Step 2

  • Polish the clean, shiny surface using the N16 shank tool and Menzerna P126 at approx. 25-30 m/s (5,000 - 5,700 rpm) in cross passes until obtaining a high gloss finish