Polishing set "gloss" Varnishes & Plastics | 4 parts for polishing stand | 150 mm
150 mm | Bore configurable
Contents: polishing discs | compounds
cut-buffing | high-gloss
Polishing-kit "high-gloss" for plastics and varnishes | polishing stand | 150mm
Four-piece high-gloss polishing-kit for plastics and varnishes, especially for stationary bench grinders or bench polishers. This polishing-kit reliably delivers a flawless high gloss and transparency on plastics and varnished surfaces.
Product features
- Cut-buffing wheel KONSTANT 4-4 N16, diameter 150 mm with configurable bore
- Vmax = 45 m/s, Umax = 5,700 rpm
- EFFEKTA X-1 "seamless" FM230 high-gloss polishing wheel, diameter 150 mm with configurable bore
- Vmax = 40 m/s, Umax = 5,100 rpm
- Pre-polishing paste "Heavy Cut" Menzerna GW18 (approx. 1.1 kg)
- High-gloss polishing compound Menzerna GW16 (approx. 1.3 kg)
Application
- Wear protective equipment and follow safety regulations!
- Roughen the polishing discs before use using a suitable dressing tool
- Wet rotating tool sparingly with polishing paste
- Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!
Step 1
- The evenly sanded and cleaned surface crosswise with the KONSTANT 4-4 N16 wheel together with Menzerna GW18 quickly pre-polish on lacquer and thermoset surfaces at approx. 20-25 m/s (2,600 - 3,200 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (1,300 - 1,900 rpm) until an even, satin-matt surface without scratches and grooves is achieved on the workpiece
- After polishing, clean the surface of abrasion and paste residues with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a tenside solution
Step 2
- The evenly pre-polished and cleaned surface in cross passes with the EFFEKTA FM230 polishing wheel together with Menzerna GW16 on lacquer and thermoset surfaces at approx. 20-25 m/s (2,600 - 3,200 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (1,300 - 1,900 rpm) quickly polish to a high gloss
- After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a tenside solution
Protective Equipment when Polishing
When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.
Wear eye / face protection
The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.
Wear respiratory protection
Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.
Wear protective clothing
Flying parts can cause sensitive injuries all over the body.
Wear gloves
In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.
Wear ear protection
Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.