Polishing set "complete" Varnishes & Plastics | 6 parts for angle grinder M14 | 200 mm

200 mm | 14 mm bore

Contents: polishing discs | compounds

cut-buffing | high-gloss | super-finish

Weight: kg
€175.19 -5% You save €8.76
€166.43
Incl. 19% VAT, excl. Shipping Cost
Availability
2-3 Days *
  • Buy 1 for €28.30 each and save 5%
  • Buy 1 for €35.34 each and save 5%
  • Buy 1 for €38.19 each and save 5%
  • Buy 1 for €15.77 each and save 5%
  • Buy 1 for €18.91 each and save 5%
  • Buy 1 for €29.93 each and save 5%
Item No.
500-ws-poly-200-4

Polishing-kit "complete" for Plastics & Varnishes | angle grinders | 200mm

Six-part polishing-kit for plastics and varnishes, especially for hand-held polishing machines or angle grinders with M14 mount. This polishing set reliably delivers a flawless shine and transparency on plastics and varnishes on carefully ground surfaces in three consecutive polishing steps.

Product features

  • Cut-buffing disc KONSTANT N16, Diameter 200 mm, customizable bore
  • High-Gloss buffing wheel EFFEKTA X-1 "Seamless", flannell FM230, Diameter 200 mm, customizable bore
  • Super-Finish buffing wheel EFFEKTA X-1 "Seamless", super-soft flannell FM209, Diameter 200 mm, customizable bore
  • Vmax = 40 m/s, Umax = 3,800 rpm
  • Pre-Polishing Compound "Heavy Cut" Menzerna GW18 (ca. 1,1 kg)
  • Finish Polishing Compound for plastics & varnishes Menzerna GW16 (ca. 1,3 kg)
  • Super Finish Compound for Metals and Polymers Menzerna P175 (ca. 1,35 kg)

Application

  • Wear protective equipment and follow safety regulations!
  • Roughen the polishing discs before use using a suitable dressing tool
  • Wet rotating tool sparingly with polishing paste
  • Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!
  • Set your polishing drive to the correct speed. You determine this based on the cutting speeds suitable for your polishing project and the wheel diameter you are using.

Step 1 - Pre-polishing

  • The evenly sanded and cleaned surface crosswise with the cut-buffing disc KONSTANT N16 together with Menzerna GW18 quickly pre-polish on lacquer and thermoset surfaces at approx. 20-25 m/s (1,900 - 2,400 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (980 - 1,450 rpm) until an even, satin-matt surface without scratches and grooves is achieved on the workpiece
  • After polishing, clean the surface of abrasion and paste residues with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a tenside solution

Step 2 - High Gloss

  • The evenly pre-polished and cleaned surface in cross passes with buffing wheel EFFEKTA FM230 together with Menzerna GW16 on lacquer and thermoset surfaces at approx. 20-25 m/s (1,900 - 2,400 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (980 - 1,450 rpm) quickly polish to a high gloss
  • After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a tenside solution

Step 3 - Superfinish

  • The clean, high-gloss polished surface is achieved with the EFFEKTA FM209 super finish polishing disc and Menzerna P175 on lacquer and thermoset surfaces at approx. 20-25 m/s (1,900 - 2,400 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (980 - 1,450 rpm) quickly in cross passes until the desired mirror finish is achieved
  • The Super Finish Paste P175 only leaves an invisible microfilm on a flawless surface. To protect this surface, one usually avoids mechanical cleaning after superfinishing