Buffing Wheel KONSTANT | Cotton "Extra Firm" | 300 mm
Material: N24032
4x4 layers
Diameter 300 mm
PRODUCT DESCRIPTION KONSTANT 4-4 / diameter 300 mm
EICKELIT KONSTANT 4-4 type polishing discs are used in particular for polishing stainless steel or aluminum. The pleated layers of fabric made of pure raw cotton allow for a medium-strong contact pressure. At the same time, KONSTANT polishing discs adapt flexibly to shaped surfaces. Thanks to their folding, the KONSTANT polishing rings deliver a strong air flow for effective cooling.
PRODUCT FEATURES
- Multiple layers of extra strong raw cotton fabric N24032, pleated in a Z-fold
- Increased contact pressure with strong cooling effect
- Pre-polishing on all metals
- Diameter 300 mm / core thickness approx. 22 mm
- Individually configurable bores 10 - 60 mm
- Calibrated for low-vibration work
- Optionally pre-roughened ready to use
- Vmax = 40 m/s, Umax = 2,550 min-1
COTTON QUALITY
We only use Oeko-Tex® certified fabrics made from raw cotton for our polishing discs. The cotton fabrics we select are very pure and do not contain any synthetic fibers. That is why EIKELIT polishing discs wear out particularly evenly with little dust formation. We always have an extensive cotton range in stock.
With N24032, mainly stainless steel and non-ferrous metals such as aluminum are polished. N24032 is an extra strong raw cotton cretonne with a specific weight of approx. 290 g/m².
APPLICATIONS Konstant Polishing Discs
Due to their pleated cotton fabric trim made up of several individual layers, KONSTANT polishing discs allow strong counter-pressure. KONSTANT is significantly firmer than the soft EFFEKTA high-gloss polishing disks with soft folding and softer than the firmer cotton polishing disks made from full-round blades.
KONSTANT polishing discs are used in particular for pre-polishing metals. Our wide range of various types of cotton fabric make them universal polishing tools.
KONSTANT polishing discs generate a powerful air flow thanks to their Z-fold and therefore have a strong cooling effect when polishing. Due to their random contact pattern, KONSTANT polishing wheels enable very homogeneous polishing patterns on large areas and shaped workpieces.
Protective Equipment when Polishing
When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.
Wear eye / face protection
The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.
Wear respiratory protection
Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.
Wear protective clothing
Flying parts can cause sensitive injuries all over the body.
Wear gloves
In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.
Wear ear protection
Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.