Air-Vent Shank Tool | Cotton "Medium-Firm" | 150 x 10 mm
SPECIAL OFFER
Material: N18
Diameter: 150 x 8 mm Shaft
Thickness: ca. 10 mm
This shank polishing tool with ventilating trim is made from our standard N18 medium-firm cotton with a 45° twisted weave. The gathered layers create sufficient cooling for polishing sensitive surfaces.
PRODUCT FEATURES
- Ventilating shaft tool made from 100% pure N18 raw cotton fabric twisted by 45°
- Diameter 150 mm, thickness approx. 10 mm
- Mandrel with a diameter of 8 mm cast with duroplastic synthetic resin
- Vmax = 30 m/s, Umax = 3.800 min-1
RAW COTTON FABRIC N18
N18 is a medium-strength raw cotton plain weave fabric with a specific weight of approx. 210 g / m². Buffing tools made of N18 are used in particular for the effective buffing of non-ferrous metals.
Protective Equipment when Polishing
When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.
Wear eye / face protection
The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.
Wear respiratory protection
Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.
Wear protective clothing
Flying parts can cause sensitive injuries all over the body.
Wear gloves
In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.
Wear ear protection
Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.
Material: N16
Ø 100 - 600 mm
Thickness: 10 – 30 mm