Polishing set "super-finish" aluminium | 4 parts for drill | 100 mm

Aluminium super finish polishing set for drills | 100mm

The four-part super finish polishing set for aluminum enables hard-to-reach aluminum components to be polished to a high gloss. This polishing set reliably delivers the flawless mirror finish that is characteristic of aluminum on carefully pre-polished aluminum surfaces.

Product features

• Effecta N2550 shank tool, 100 x 6 mm
• Effecta FM230 shank tool, 100 x 6 mm
• V_max = 30 m/s, U_max = 5,700 rpm
• High-gloss polishing paste Menzerna 480BLF (approx. 1.3 kg)
• Super Finish polishing paste Menzerna P175 (approx. 1 .35 kg)

Application

• Wear protective equipment and follow safety regulations!
• Roughen the polishing discs before use using a suitable dressing tool
• Wet rotating tool sparingly with polishing paste
• Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!

Step 1

• The evenly pre-polished and cleaned surface in cross passes with a shank tool Effekta N2550 and Menzerna 480BLF at approx. 25-30 m/s (5,000 - 5,700 rpm) quickly polish to a high gloss
• After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime

Step 2

• The clean, mirror-polished surface using the Effekta FM230 shank tool and Polish the Menzerna P175 at approx. 25-30 m/s (5,000 - 5,700 rpm) quickly in cross passes to a super finish
• The Super Finish Paste P175 only leaves an invisible microfilm on the flawless surface. To protect this surface, mechanical cleaning after superfinishing is usually avoided