Aluminium "complete" polishing set for drills | 125mm
With the six-part drill complete polishing set for aluminum, even hard-to-reach, finely ground aluminum components can be refined to a super finish. The surface treatment takes place in three steps: pre-polishing, main polishing and super finish. With this complete polishing set, you can reliably achieve the flawless mirror finish that is characteristic of aluminum on carefully ground aluminum surfaces.
The evenly sanded and cleaned surface crosswise with the SB-VR-10 sisal nettle shaft tool together with Menzerna 439T quickly pre-polish at approx. 25-30 m/s (4,000 - 4,600 rpm) until an even, satin-matt surface without scratches and grooves is achieved on the workpiece
After polishing, clean the surface of abrasion and paste residues with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime
The evenly pre-polished and cleaned surface in cross passes with a shank tool Effekta N2550 together with Menzerna 480BLF at approx. 25-30 m/s (4,000 - 4,600 rpm) quickly polish to a high gloss
After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime
The clean, mirror-polished surface using the Effekta FM230 shank tool and Polish the Menzerna P175 at approx. 25-30 m/s (4,000 - 4,600 rpm) quickly in cross passes to a super finish
The Super Finish Paste P175 only leaves an invisible microfilm on the flawless surface. To protect this surface, mechanical cleaning after superfinishing is usually avoided