Polishing set "complete" | 6 parts for angle grinder M14 | 250 mm

250 mm | 14 mm bore

Contents: polishing discs | compounds

cut-buffing | high-gloss | super-finish

Weight: kg
€227.25 -5% You save €11.36
€215.89
Incl. VAT (Total price depending on the VAT rate of the country of delivery), excl. Shipping Cost

Discount compared to single retail prices

Availability
2-3 Days *
  • Buy 1 for €17.20 each and save 5%
  • Buy 1 for €33.73 each and save 5%
  • Buy 1 for €32.21 each and save 5%
  • Buy 1 for €55.10 each and save 5%
  • Buy 1 for €34.20 each and save 5%
  • Buy 1 for €43.46 each and save 5%
Item No.
500-ws-alu-250-4

Aluminium "complete" polishing set for angle grinders | 250mm

Six-part polishing set for aluminium, especially for hand-held polishing machines or angle grinders with M14 mount. This polishing set reliably delivers the flawless mirror finish that is characteristic of aluminum on carefully ground aluminum surfaces in three coordinated polishing steps.

Product features

Application

  • Wear protective equipment and follow safety regulations!
  • Roughen the polishing discs before use using a suitable dressing tool
  • Wet rotating tool sparingly with polishing paste
  • Measure the pressure carefully! Too high contact pressure and/or too low speeds lead to overheating of the workpiece with uneven surfaces that can no longer be improved by polishing!

Step 1 - Pre-polishing

  • The evenly sanded and cleaned surface crosswise with the SB-VR-10 sisal nettle shaft tool together with Menzerna 439T quickly pre-polish at approx. 35-40 m/s (2,650 - 3,000 rpm) until the workpiece has an even, satin-matt surface without scratches or grooves
  • After polishing, clean the surface of abrasion and paste residues with a dry, soft and lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime

Step 2 - High Gloss

  • The evenly pre-polished and cleaned surface in cross passes with a shank tool Effekta N2550 together with Menzerna 480BLF at approx. 30-35 m/s (2,300 - 2,650 rpm) quickly polish to a high gloss
  • After polishing, clean the surface with a dry, soft, lint-free cloth. If necessary, degrease the workpiece with a suitable solvent or Viennese lime

Step 3 - Superfinish

  • The clean surface, polished to a high gloss, is achieved with the Effecta FM230 Super Finish polishing disc and Menzerna P175 at approx. 30-35 m/s (2,300 - 2,650 rpm) quickly in cross passes until the desired mirror finish is achieved
  • The Super Finish Paste P175 only leaves an invisible microfilm on the flawless surface. To protect this surface, one usually avoids mechanical cleaning after superfinishing