Polishing set "finish" Varnishes & Plastics | 2 parts for polishing stand | 200 mm

200 mm | Bore configurable

Contents: polishing disc | compound


Weight: kg
€59.90 -5% You save €2.99
Incl. 19% VAT, excl. Shipping Cost
2-3 Days *
  • Buy 1 for €35.34 each and save 5%
  • Buy 1 for €21.57 each and save 5%
Item No.

Polishing-kit "Finish" for plastics and varnished surfaces | polishing stand | 200mm

Polishing-kit with configurable bore for high-gloss polishing on the polishing block or grinding block with mounting flange or conical thread. The two-part polishing set quickly delivers a clear high gloss on carefully pre-polished plastics and varnished surfaces.

Product features

  • EFFEKTA X-1 "seamless" FM230 polishing wheel, diameter 200 mm / configurable bore
  • Vmax = 40 m/s, Umax = 3,800 rpm
  • High-gloss polishing compound Menzerna GW16 (approx. 1.3 kg)


  • Wear protective equipment and follow safety regulations!
  • First roughen the polishing wheel with the help of a suitable dressing tool
  • Wet the rotating tool with the polishing paste
  • Polish the evenly pre-polished and clean surface quickly in cross-coats on lacquer and thermoset surfaces at approx. 20-25 m/s (1,900 - 2,400 rpm), on thermoplastic workpieces at approx. 10 -15 m/s (980 - 1,450 rpm) to a high gloss
  • Measure the pressure carefully! If the contact pressure is too high and/or the speed is too low, this can lead to an unsteady surface due to overheating of the workpiece
  • After polishing, clean the surface with a soft, lint-free cloth and, if necessary, degrease with a tenside solution