Abrasive Fleece Discs | AlOx "Extra Coarse" | 80-200 x 12 mm | 10 pieces
"Extra Coarse" AO-002 | Grit 45
Diameter 80 - 200 mm
Bore 12 mm
Packing Unit = 10 pc
Product features
- Abrasive fleece AO-002 has a very firm texture
- The aluminum oxide abrasives in AO-002 correspond to a grit of approx. grit 45 and provide a very coarse grinding pattern
- Diameter 80 - 200 mm / approx. 12 mm bore
- Perfectly suited for sanding inaccessible areas and fillet welds
- Vmax = 30 m/s
Protective Equipment when Polishing
When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.
Wear eye / face protection
The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.
Wear respiratory protection
Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.
Wear protective clothing
Flying parts can cause sensitive injuries all over the body.
Wear gloves
In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.
Wear ear protection
Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.
Mandrel 6 mm / left-hand thread
Bore: 12 mm
Clamping thickness: 12 mm
Disc diameter: <100 mm
Mandrel 8 mm / left-hand thread
Bore: 12 mm
Clamping thickness: 30 mm
Disc diameter: <150 mm