Polishing paste set copper-brass | pre-polishing / high lustre | Menzerna 456G / 480W
Two-piece high-gloss set | Brass, copper, bronze
- Pre-polishing paste 456G | Gray
- High gloss paste 480W | Beige
A shiny golden surface of brass can be easily achieved by polishing. However, copper alloys tend to oxidize over time, causing them to take on a dull and brownish hue. For this reason, the optical preparation of brass and copper surfaces plays an important role, which requires special polishing tools and pastes.
The two-part high-gloss polishing paste set for copper, brass and bronze consists of:
MENZERNA 456G PRE-POLISHING PASTE "HEAVY CUT"
The Menzerna 456G is an efficient pre-polishing paste that was specifically developed for non-ferrous metals such as brass, copper, bronze, precious metals such as gold, silver and stainless steel. Even deep scratches can be easily removed with this paste, as its special polishing bodies are characterized by a particularly even grain size distribution. This means that particularly uniform polishing results can be achieved within a short time with the Menzerna 456G.
The exclusive special paste 456G is used primarily in the jewelry industry and in the production and restoration of wind instruments. It is processed in combination with pre-polishing discs made of sisal, sisal nettle or particularly robust types of cotton.
- Abrasive special paste for pre-polishing non-ferrous metals and precious metals
- High removal rate with a particularly even polishing pattern
- Processed together with sisal or solid cotton polishing discs
- Fat content: Dry
- Weight: 1.4 kg
MENZERNA 480W FINISH POLISHING PASTE | POLISHING BRASS & COPPER
The Menzerna 480W is a high-gloss paste that was specially developed for the professional polishing of brass, copper and bronze on machines. It creates a beautiful and deep shine on brass and is therefore often used for musical instruments or elegant applications in saddlery. In addition, the 480W is also suitable for other non-ferrous metals as well as for polishing aluminum or copper.
- High gloss paste specially developed for professional polishing of brass and other non-ferrous metals
- Especially suitable for use on automatic polishing machines for brass
- Quickly creates a high shine with a particularly beautiful surface appearance
- Fat content: Medium
- Weight: 1.2 kg
- Processing with medium-strength to soft cotton polishing discs
Protective Equipment when Polishing
When grinding and polishing, the work equipment used creates considerable health risks. It is therefore compulsory to wear suitable personal protective equipment for work safety when grinding and polishing. In particular, all rotating polishing and brushing tools may only be operated with suitable covers for reasons of occupational safety.
Wear eye / face protection
The fine dust emanating from polishing is harmful to the eyes. Flying parts can cause serious injuries to the face and eyes.
Wear respiratory protection
Fine dust contaminated with heavy metals and respirable, which can only be retained with suitable respiratory protection, is produced during polishing.
Wear protective clothing
Flying parts can cause sensitive injuries all over the body.
Wear gloves
In general, gloves should be worn when grinding and polishing. If there is a risk of being wound up (e.g. drills, processing small parts, etc.), gloves may be prohibited on the basis of a risk assessment.
Wear ear protection
Due to the noise exposure during grinding and polishing, it is necessary to wear suitable hearing protection on a regular basis.